Voice evacuation systems

The Previdia control panels are also capable of managing voice evacuation systems (“Voice Evac”) that are not made by Inim Electronics. Among these are:

  • Tutondo

  • Paso

  • Vivaldi

The configuration of these systems is implemented inside the module for the LAN interfaces of the control panels (IFMLAN for Previdia Max and Previdia Ultra, PREVIDIA-C-COM for Previdia Compact and Previdia Micro). Through these sections, it is possible to configure up to 255 evacuation zones as outputs for which alert and evacuation messages can be activated.

[A] 

List of added evacuation zones.

For “Tutondo”, it is necessary to add “End evacuation” to all zones, a message common to all zones.

[B] 

Type of voice evacuation system.

Where available the button shows the connection to be made.

[C] 

Field for the number of evacuation zones

[D] 

Address of the Previdia control panel on the selected evacuation system:

  • for “Paso” and “Vivaldi” it is necessary to indicate the address on the RS485 connection BUS
  • for “Tutondo” it is necessary to indicate the IP address and the port

[E] 

Parameters of the selected evacuation zone

For each zone selected from the list of added zones, the following parameters can be configured:

  • Group – button that opens the window where it is possible to indicate the output groups the evacuation zone belongs to.

  • Message for ... – fields where it is possible to select a message for each status signal (stand-by/alert/pre-active/active).

  • Silenceable – option that makes the evacuation zone silenceable.